Shale Slate Seamless Polyurethan Texture Stamp Mat Skin Concrete Cement Stamping

Description

Polyurethane stamp
"
Shale
"
Size
:
600 x 300
mm
23.62 x 11,8
Inches
MADE OF HIGH-QUALITY AUSTRALIAN POLYURETHANE
THEY DONT REQUIRE EXPENSIVE RELEASE GREASE
PRICES FROM MANUFACTURER
UNIQUE DESIGNE
EASY TO USE
Polyurethane Stamp, for vertical  decorative Concrete/plaster Texture stamp work
.
The use of our flexible polyurethane stamps provides high quality printing on a concrete, gypsum and cement plasters, adhesives and putty, both vertical and horizontal surfaces.
Rigid/Thick mats have nylon handle inserts. These Stamps are for commercial Use and are not one of those cheap sets you will be replacing.
Item pays for it self and allows you to get more money per foot and enables you to give your customers more options for customizing there sidewalks, driveways, patios, and other concrete surfaces as well as plaster work.
Our company produces high-quality polyurethane molds for the rough stone.
Recommendations for working with polyurethane stamp:
1. Preparing the wall. Optionally, you can make the reinforcement with a metal mesh around the surface, attaching it to the wall with screws. Be sure to do the reinforcement when working with plaster thicker than 5 mm.
2. The recommended composition of the mixture for the facade surface:
white cement 1 part,
2 parts of river sand,
1 part white facade putty,
optional pigment iron oxide (ask in hardware stores, the recommended number is indicated by the manufacturer on the package)
After applying the mixture on the wall, wait a little time before punching, so that your plaster mix will have plasticity and lose some water. Touch with a hand or a stamp to the surface, if the plaster does not stretch and does not stick, you can stamp it.
3. For lubrication stamps can use the engine oil or soapy water  Wipe the stamp with a rag or you can sprinkle with a spray
By applying a stamp and knocking its surface you create a drawing. Also note that when using the "Rock" stamps, after the surface dries out, you can walk around the contours of the cracks with a jointing (or other sharp object) for their greater expressiveness.
4. Painting the surface. The whole structure of the stamped surface appears after painting.
For staining is better to use:
primer (any brand)
color pigment
The primer is the most reliable material that will help to maintain color for a long time and will not break away with time. You can paint with a sponge, roller, compressor.
Also when painting, note that the saturation of color comes after 30 minutes - 1 hour, the color turns from pale to bright as it dries.
At the end of the painting, walk with acrylic varnish on the painted surface, the varnish will create the effect of a wet stone and add shine
If you have any questions please contact.
Sincerely, Maxim
Do it yourself - you can do it
!!!
SHIPPING
Special order mold takes 2-5 working days to make from date of payment.
FREE priority airmail shipping with tracking number
Shipping time
Europe
10-12 days
Germany
14-18 days
USA, Canada
10-15 days
Asia, South America
14-20 days
Australia, New Zeland
20-24 days
Africa, Central America
24-34 days